Planet Technology ADW-4302A Instrukcja Użytkownika Pobierz pdf (Strona 13)

Installation

3. Connect ADSL Cable

Connect the supplied ADSL cable from to the WAN port on the ADW-4302v2 (the

RJ-11 connector) to the ADSL terminator provided by your phone company.

4. Power Up

Connect the supplied power adapter to the ADW-4302v2. Use only the power

adapter provided. Using a different one may cause hardware damage.

5. Check the LEDs

• The Power LED should be ON.

• The Status LED should flash, then turn Off. If it stays on or blinking after 60 sec-

onds, there is a hardware error.

• For each LAN (PC) connection, one of the LAN LEDs should be ON (provided the

PC is also ON.)

• The WLAN LED should be ON.

• The WAN LED should be ON if ADSL line is connected.

• The Internet LED may be OFF. After configuration, it should come ON.

For more information, refer to Front-mounted LEDs in Chapter 1.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 141 142

Brak uwag

Planet Technology ADW-4302A Instrukcja Użytkownika Strona 13