Planet-technology ISW-800M Instrukcja Użytkownika Strona 15

  • Pobierz
  • Dodaj do moich podręczników
  • Drukuj
Przeglądanie stron 14
Step2: Lightly push the button of DIN-Rail into the track.
Step3: Check the DIN-Rail is tightly on the track.
Step4: To remove the industrial switch from the track, reverse steps above.
2.2.2 Wall Mount Plate Mounting
To install the switch on the wall, please follows the instructions described below.
Step1: Remove the DIN-Rail from the industrial switch; loose the screws to remove the DIN-Rail.
Step2: Place the wall mount plate on the rear panel of the industrial switch.
Przeglądanie stron 14
1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 56 57

Komentarze do niniejszej Instrukcji

Brak uwag