Planet-technology ADSL 2/2+ Router with USB Port ADE-3410v2 Instrukcja Użytkownika Pobierz pdf (Strona 62)

2. Question: Why LINK/ACT LED is not lighting?

Answer:

• Check the connection between the ADSL router and your computer or Hub/Switch.

• Check your PC or Hub/Switch running status and make sure them are working

normally.

• Check your network cable for connecting the Router with other device:

For PC, you should use the crossover cable;

For Hub/Switch, you should use straight through cable.

3. Question: Why LINK LED is not lighting?

Answer:

Check the connection between the ADSL “line” port and the wall jack.

4. Question: Why cannot visit Internet with LINK LED is on?

Answer:

Make sure following information has been input correctly:

VPI/VCI

Username/Password.

5. Question: Why cannot open the Router configuring web page?

Answer:

Follow below steps to check the communication between the computer and Router:

Click start -> run (input ping demands) -> Ping 192.168.1.1 (ROUTER IP Address).

If cannot reach the router, please check following configuration:

• The type of the network cable

• The connection between the router and computer

• You computer’s TCP/IP setting

6. Question: How to load the default setting after incorrect configuration?

Answer:

Press “reset” button and holds around 10s to load the default configuration.

The router’s default IP address: 192.168.1.1/255.255.255.0,

User/password: admin/admin

1 2 ... 57 58 59 60 61 62

Brak uwag

Planet-technology ADSL 2/2+ Router with USB Port ADE-3410v2 Instrukcja Użytkownika Strona 62