Planet-technology VC-200S Instrukcja Użytkownika Pobierz pdf (Strona 37)

3.5.5.1 LAN Setting

To configure the LAN interface, click on the LAN Setting link in the left navigation

bar, show as below.

The Dynamic Host Configuration Protocol (DHCP) Server gives out IP addresses

when a device is booting up and request an IP to be logged on to the network. It must be

set as a DHCP client to obtain the IP address automatically.

Note: By factory default, the DHCP is disabled, VC-200M’s default LAN IP address

is 192.168.1.100, and VC-200S is 192.168.1.200.

The screen contains the following details:

Filed Description

IP Address Enter the LAN interface IP Address of

VC-200M/VC-200S

Subnet Mask Enter the LAN Subnet Mask of VC-200M/VC-200S

The Gateway acts as

DHCP Server

Enable or disables the DHCP Server of the of

VC-200M/VC-200S.

Select the check-box to enable this option.

IP Pool Starting

Address

Enter the starting IP Address of the DHCP server.(When

Enable DHCP Server)

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 55 56

Brak uwag

Planet-technology VC-200S Instrukcja Użytkownika Strona 37