Planet Technology WRT-415 Instrukcja Użytkownika

802.11g Wireless Broadband Router WRT-415 User’s Manual

Chapter 2 Hardware Installation Before you proceed with the installation, it is necessary that you have enough information about the WRT-415. 2.1 Ha

Green Link is established 3 Blinking Green Packets are transmitting or receiving Green Link is established 4 Blinking Green Packets are transmi

Chapter 3 Configure through Web Browser Web configuration provides a user-friendly graphical user interface (web pages) to manage your WRT-415. 1. O

mask, and domain name. LAN and DHCP profiles are listed in the DHCP table at the bottom of the screen. Host Name: Type the host name in the text box.

MAC Address: If required by your ISP, type the MAC address for the WRT-415 WAN interface in this field. You can also copy the MAC address of your

When using PPTP, enter the following information in the fields (some information are provided by your ISP): Dynamic IP / Static IP: Select the IP as

When using L2TP, enter the following information in the fields (some information are provided by your ISP): Dynamic IP / Static IP: Select the IP as

Administrator: Type the password the Administrator will use to login to the system. The password must be typed again for confirmation. User: Users c

Set the Time: Select the date and time from the pull-down lists, and click “Set Time” to set the WRT-415's internal clock to the correct date an

Wireless Radio: Enable or disable wireless LAN via the WRT-415. SSID: Type an SSID in the field. The SSID of any wireless device must match the SSID

Copyright Copyright© 2006 by PLANET Technology Corp. All rights reserved. No part of this publication may be reproduced, transmitted, transcribe

WEP Key: Select the level of encryption you want from the drop-down list. WRT-415 supports 64, and 128-bit encryption. Key 1 ~ Key 4: There are 4 key

3.2.3 Advanced This screen enables you to configure advanced wireless functions. Beacon Interval: Type the beacon interval in the field. You can sp

SSID Broadcast: If disabled, no SSID is broadcast. If enabled, the SSID of WRT-415 will then be broadcast to all wireless stations. Stations which ha

3.3.2 Log This screen will show you a running log of system statistics, events and activities. The log displays up to 200 entries. Older entries are

SMTP Server: Type the SMTP server address for the email that the log will be sent to in the next field. Send to: Type an email address for the log t

3.3.5 Wireless This screen will show you which wireless devices that are connected to this WRT-415 via wireless interface. Connected Time: Displays

Network Mask: Type the network (subnet) mask for your network. If you do not type a value here, the network mask defaults to 255.255.255.255. Your IS

Network Address: Displays the network IP address of the connected node. Network Mask: Displays the network (subnet) mask of the connected node. Gate

Only allow computers … : All users are denied Internet access except those users listed in MAC table. Only deny computers … : All users are allowed

Edit Protocol Filter in List: Use this section to create a profile for the protocol you want to deny Internet access to. Enable: Click to enable or d

Federal Communication Commission (FCC) Radiation Exposure Statement This equipment complies with FCC radiation exposure set forth for an uncontrolled

3.5.4 Virtual Server This screen enables you to create a virtual server via the WRT-415. If the WRT-415 is set as a virtual server, remote users requ

Enable: Click to enable or disable the application profile. When enabled, users will be able to connect to the application via the WRT-415 WAN conne

Enable: Click to enable or disable the DMZ. DMZ Host IP: Type a host IP address for the DMZ. The computer with this IP address acts as a DMZ host wi

Enable: Click to enable or disable the firewall rule profile. Name: Type a descriptive name for the firewall rule profile. Action: Select whether to

3.6 Management 3.6.1 Remote Management This screen enables you to set up remote management. Using remote management, the WRT-415 can be configured th

3.7.2 Settings This screen allows you to save settings as a profile and load profiles for different circumstances. You can also load the factory def

Load Settings: Click “Browse” and go to the location of a stored profile. Click Load to load the profile's settings. Restore Factory Default Set

3.8 Wizard The setup wizard enables you to configure the WRT-415 quickly and conveniently. Click “Wizard” button, the window below will appear. Plea

Appendix A TCP/IP Settings for PC The network TCP/IP settings differ based on the computer’s operating system (Win95/98/ME/NT/2000/XP) and are as fol

6. Select “None” for the “Gateway address” field. Windows 2000 Double click on the “My computer” icon on the desktop. When “My computer” window ope

Rev: 1.0 (April. 2006) Part No. EM-WRT415

Windows XP Point the cursor and click the right button on the “My Network Place” icon. Select “properties” to enter the TCP/IP setting window. 1. Se

TABLE OF CONTENTS CHAPTER 1 INTRODUCTION...1

3.5.5 Special AP...24 3.5.6 D

Chapter 1 Introduction The PLANET WRT-415 is an 802.11g wireless router that supports high-speed wireless networking for home or SOHO users. The WRT-

1.3 Features • 2.4GHz ISM band, unlicensed operation • Supports WPA (Wi-Fi Protected Access) for both 802.1x and WPA-PSK • Dual-standard capabili

EMI: FCC Class B, CE Mark B 1.5 Wireless Performance The following information will help you utilizing the wireless performance, and operating cove